Elevations Section 3
Elevations - Level Two
Setting up the the Rotated Elevation View
1. With the Elevation Section "A1" open, use your keybord or pull down menu to do a "Select All"
(apple - A)
Then use the keybord or pull-down menu to COPY everything in the window (apple - C)
2. Switch back to Floor Plan mode (apple - 2) and PASTE the elevation into your floor plan view.
NOTE: do not release the elevation from the dotted lines until you have
moved it away from the floor plan itself (otherwise it may get messy)
3. Create a new layer for each elevation placed into your floor plan (there will be four altogether)
(The elevation views will have to be hidden when we move on to the next unit)
4. Continue creating new section views for all four sides of the house (North, South, East and West
elevations)
5. Copy each section elevation view and paste it into the floor plan.
6. Rotate each elevation around the floorplan so that the elvations can all be seen clearly in their
relationship to the floor plan view.
Click to Enlarge
------->
You have finished evations Level Three
Level Four (Rendering Elevations) will continue explaining the Elevation View in detail
Top
October 25, 2005