Notebook Division Sheet
DIVISION SHEET FOR UNIT 2
-----Technical Drawing for Architecture requires a notebook be submitted to calculate a portion of
your grade. Each unit in the course is seperated in the notebook by a Division Sheet.
-----Division Sheets are created using one of these two programs: ArchiCAD or Appleworks.
-----Both programs require that you follw directions carefully and print your finished product for
grading. Depending on the complexity of these assignemnts, Division Sheets will be graded on a 25 or
50 point basis.
DIVISION SHEET #2
This Division Sheet will simulate the concept of space planning using grids and specified shapes to
reflect square footage on your floor plans.
Use Appleworks to complete this assignment
CLICK IMAGED FOR ENLARGED VIEW
INSTRUCTIONS
1. Open your hard drive and locate the Appleworks folder. Double-click on the Appleworks icon and open
the program
2. Begin with a new DRAWING Document and save it as Division Sheet #2
3. TITLE: RESIDENTIAL PLANNING. Use Palatino for a Font and use 48 point text to place the label
centered on the top of the page. NOTE: Appleworks requires a 1/4" border that is not printed around
the outside edge of the sheet
4. UNIT NUMBER: Use Palatino for a Font and use 36 point text to place the unit number in the bottom
right-hand corner of the page.
5. NAME: Use Palatino for a Font and use 30 point text to place your name in the lower-left hand
corner of the page.
6. Using the drawing tools place several scale sized "rooms" onto the sheet similar to the sample
shown above. Use the following color codes to finish the details of the sheet:
---- LIVING AREA --------------- SLEEPING AREA --------------- SERVICE AREA --------------- TRAFFIC
AREA
--------GREEN --------------------------- BLUE------------------------------- RED
----------------------------- WHITE
<---------- Use the Square tool
<---------- and the Fill tool
7. Print the Division Sheet 8 1/2" x 11" paper using the color printer and submit for grading
Top
October 25, 2005